Filter
Top Products
SERIES II 20 AMP POWER CONDITIONERS
9. Do not attempt to service your Series II unit
beyond what is described in this manual. All
other servicing should be referred to qualied
service personnel.
ADDITIONAL F E A T U R E S
PL-PRO SERIES II
The PL-PRO II features LED rack lights which
produce virtually no heat and provide an
extremely long life span. A dimmer control
for the rack lights allows the user to adjust the
level of illumination or simply switch the lights
off. A rear mounted BNC jack accepts any
standard (12VAC 0.5 amp) gooseneck lamp for
rear rack illumination.
Additionally, the PL-PRO II offers a 20 segment
LED bar-graph meter that displays incoming
voltage between 90 and 128 volts in 2-volt
steps. The normal range voltages are indicated
in green, with moderately and extremely high
or low voltages in yellow and red respectively.
The voltmeter’s accuracy is ±2 volts. It can
easily be re-calibrated, if necessary.
(E-
versions 180 – 256 VAC in 4 volt steps)
The PL-PRO II has a master magnetic circuit
breaker switch for the front and rear outlets that
is protected from accidental disconnection by
a hinged cover. The PL-PRO II also features a
10 foot, 12 gauge heavy-duty power cable.
PL-PRO D SERIES II
The PL-PRO D II features LED rack lights
which produce virtually no heat and provide
an extremely long life span. A dimmer control
for the rack lights allows the user to adjust
the level of illumination. A rear mounted BNC
jack accepts any standard (12VAC 0.5 amp)
gooseneck lamp for rear rack illumination.
Additionally, the PL-PRO D II offers a
laboratory precision digital meter that displays
incoming voltage in 1-volt steps. The
voltmeter’s accuracy is ±1.5 volt.
The PL-PRO D II has a master magnetic circuit
breaker switch for the front and rear outlets
that is protected from accidental disconnection
by a hinged cover. The PL-PRO D II also
features a 10 foot, 12 gauge heavy-duty power
cable.
PM-PRO SERIES II
The PM-PRO II features two laboratory
precision digital meters that display both
incoming voltage in 1-volt steps, and a true
R.M.S. current meter that measures the AC
power draw within 0.5 amp. A rear mounted
BNC jack accepts any standard (12VAC 0.5
amp) gooseneck lamp for rear rack illumination.
The PM-PRO II has a master magnetic circuit
breaker switch for the front and rear outlets
that is protected from accidental disconnection
by a hinged cover. The PM-PRO II also
features a 10 foot, 12 gauge heavy-duty power
cable.
4