Filter
Top Products
10
Return shipping charges back to purchaser will be paid by Furman.
CONNECTED EQUIPMENT WARRANTY: Furman Sound’s Connected
Equipment Warranty covers equipment that is damaged by transient voltage (an
“Occurrence”) while properly connected through the Furman PST-10D to a properly
wired AC power line with a protective ground in an indoor location. Furman’s
Connected Equipment Warranty is limited to the amount of the deductible on the
Purchaser’s personal property insurance policy up to $500.00. In order to make
a claim for this Connected Equipment Warranty, the Purchaser must forward a
copy of his/her personal property insurance claim for the damaged equipment to
Furman and complete the Furman Connected Equipment Warranty claim form
(call Furman at (707) 763-1010 to obtain the form). Furman reserves the right to
review the damaged Furman product, the damaged connected equipment, and
the site where the damage occurred. All cost of shipping damaged equipment
to Furman for inspection shall be borne solely by the Purchaser. Damaged
equipment must remain available for inspection until the claim is finalized. The
Connected Equipment Warranty is also in effect for a period of three years unless
the Purchaser does not complete the warranty registration within fifteen days from
date of purchase, at which time, the Connected Equipment Warranty period is also
reduced to one year from the date of purchase.
All warranties contained herein are null and void if: the Furman Surge Protector
in use during the occurrence is not provided to Furman for inspection upon
Furman’s request at the sole expense of the Purchaser, Furman determines that
the Furman Surge Protector has been opened, improperly installed, altered in any
way or tampered with, Furman determines that the damage did not result from
the Occurrence or that no Occurrence in fact took place or Furman determines
that the connected equipment was not used under normal operating conditions
or in accordance with Manufacturer’s instructions for the connected equipment.
All Furman Surge Protectors must be plugged directly into a properly wired AC
power line with a protective ground and must not be “daisy-chained” together in
serial fashion with other power strips, UPS’s, other surge protectors, three-to-two-