Filter
Top Products
6
Keypad lock
Set whether the keypad is locked or not. When
locked, the keypad does not answer to user
commands, unless the LOCK key is pressed
together with a desired key. If the monitor is
connected to radar/ECDIS with an RS-232C
cable, Off returns to On after turning the power off
and then on.
Serial protocol
Choose how the equipment will respond to
ECDIS commands. In Standard ECDIS mode, the
equipment will be compliant with the ECDIS
specification, while in ISIC ECDIS mode the
values are transmitted in decimal representation
and are scaled to a percentage range.
OSD Position
Choose if the On Screen Display is shown on the
right or left side of the monitor.
User preferences
Factory defaults
This function provides a reset of the monitor
to the factory defaults. By activating this
function, all settings made by the user will be
lost and the monitor will be brought back to
known operating conditions.
Setup selection
This setting allows the user to select which
user slot to handle with the Save monitor
setup and Recall monitor setup keys.
Save monitor setup
This function allows the user to save all
important current settings to a memory for
later recall. There are three slots available;
which one is used to store the settings
depends on the Setup selection menu item.
Saving settings in a slot that contains
previous settings will overwrite the old
settings to store the new ones.
Recall monitor setup
This function allows the user to recall the
settings stored with the Save monitor setup
push key. Which setting is recalled depends
on the Setup selection menu item.