51839250X62NXS_V_1_1_E.DOC
15/15
quantity of oil must not be excessive in order to avoid that oil runs out when the gobo-wheel rotates.
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Please refer to the instructions under "Installing/Replacing the lamp".
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Open the fuseholder on the rearpanel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply: 230 V AC, 50 Hz
Power consumption: 500 W
DMX-control-channels: 6
DMX-512-connection: 3-pin XLR
Sound-control: via built-in microphone
Flash-rate: 10 Hz
Number of colours: 7 dichroic + white
Number of gobos: 7 rotating gobos and open
Dimensions (LxWxH): 525 x 300 x 150 mm
Weight: 15 kg
Maximum ambient temperature t
a
:
45° C
Maximum housing temperature t
B
(steady state):
60° C
Min.distance from flammable surfaces: 0.5 m
Min.distance to lighted object: 0.5 m
Fuse: F 5 A, 250 V
Fitting lamps:
OMNILUX OSD 90V/250W GX-9,5 2000h 6700K No. 89106005
OSRAM HSD250 90V/250W GY-9,5 2000h No. 89106010
SYLVANIA BA250/2 SE D 90V/250W GY-9,5 No. 89106120
PHILIPS MSD250 90V/250W GY-9,5 2000h No. 89106015
OSRAM HSD250/2 90V/250W GY9,5 3000h 7800K No. 89106110
PHILIPS MSD250/2 90V/250W GY-9,5 2000h No. 89106115
Recommended controllers:
FUTURELIGHT CP-256 controller No. 51834285
FUTURELIGHT CP-256/32 controller No. 51834286
Wizard-512 DMX-Software + Interface No. 51860101
Wizard-1024 DMX-Software + Interface No. 51860110
Please note: Every information is subject to change without prior notice. 21.03.2003 ©