Filter
Top Products
CSG14 Series Gigabit Converter Switch Installation and User Guide (12/08)
22
www GarrettCom com
..
The front side of the unit has two twisted-pair 10/100/1000Mb switch ports and
one 10, 100 or 1000Mb fiber port. Both the RJ-45 ports of the CSG14 Series Converter
switches support auto cross (MDIX) operation performing the autocross function under
auto-negotiation mode only. The CSG14 models are factory configured at Full Duplex.
Two sets of LEDs indicating the operating status of ports are mounted on the top
and front (for extra viewing advantage while rack-mounted). For each port, there are Link
and Activity (LK/ACT) LED’s on the top indicating that the media cables are connected
correctly and showing, by blinking, when there is traffic. The LK/ACT LED’s are
repeated on the front as LA1 (port 1), LA2 (port 2), and LA3 (port 3). There is a power
(PWR) indicator on the front of the unit to validate that the unit is turned ON.
The single fiber port on the CSG14 is multi-mode with an SC connector or small
form-factor connector (LC single-mode).
The external DC power plug connector and/or “jack” and the internal DC input
terminal is provided on the rear of the unit.
Fi
g
2.2c