Filter
Top Products
Magnum P62-Series Hardened Switches Installation and User Guide (11/03)
13
2.2.5 RS-232 (DB-9) Console Com. port pin assignments.
Pin 1
Pin 5
DB-9 (Console port connector)
Pin Signal Description
1 CD Carrier detect (not used)
2 RXD Receive Data (input)
3 TXD Transmit Data (output)
4 open not used
5 GND Signal Ground
6-9 open not used
The above provided information enables a managed station( a PC or Console terminal) to connect
directly to the switch using a straight through cable.(Note: The Null-Modem (DB-9) cable is
optional and can be order from the factory, along with the unit
2.3 Fiber port, SC Connectors
The Fast Ethernet fiber switched ports on the Magnum P62-Series operate at
fixed 100Mb speed and full-duplex mode for the best performance. The P62’s fiber ports are
factory-built as either a multi-mode or single-mode SC connector. A yellow label on the fiber port
connector will indicate if it is single-mode. Otherwise it is a multi-mode port. Each 100Mbps
fiber port performs as a switched port and as a traffic domain, providing a high bandwidth
backbone connection that supports long (up to 20km single-mode, or 40km special “long-reach”)
fiber cable distances for installation versatility. A fiber port of a P62F is shown here,
www GarrettCom com
..