Filter
Top Products
Magnum P80F & P80C Personal Switches Installation and User Guide (07/03)
3
www GarrettCom com
..
External -48VDC Power Supply (Optional)
Power Input Voltage: 36 to 70 VDC (auto ranging), “-, GND, +”
Power Consumption: 8 watts typical, 10 watts max.
Network Cable Connectors - for eight RJ-45 shielded female ports and 1 fiber port
100Mbps: Category 5 UTP/STP, fiber (50/125, 62.5/125, 9/125 micron)
10 Mbps: Category 3, 4, 5 UTP (Note: auto-sensing does not sense cable type)
Maximum Load per port: 60 mA
Up-Link, Port # 1 or 1SW
Port # 1 (switched RJ-45) has a manual crossover (MDIX up-link) switch for
connection to a central switch or to another P80F, P80C (or equal) unit. The up-
link port # 1 is auto-sensing for speed, and its auto-negotiating up-link feature
works the same at 10 Mbps or 100Mbps speed and at full- or half-duplex mode.
Full- or Half-Duplex selection on switched Ports # 2 or 2SW for Magnum P80F
Manual switch selects fiber port for FDX or HDX. See Section 4.3 for details.
Full-Fixed or Auto-negotiation selection on switched Ports # 2 or 2SW for
Magnum P80
Manual switch selects port #2 for “FF” or “A”. See Section 4.3 for details.
Packaging
Enclosure: Rugged high-strength sheet metal. Metal mounting clips
included. Suitable for wiring closet shelf, wall or desktop mounting.
Dimensions: 1.25 in H x 6.75 in W x 5.0 in D (3.2 cm x 17.1 cm x 12.7 cm)
Weight (of Switch unit): 1.0 lb. (455 g.)
Weight (of power supply unit): 1.0 lb. (455 g.)
Cooling method: Convection
LED Indicators
PWR: Steady On when power applied
ERROR: Self-test at power up failed
SPEED (with LINK ON): ON = 100Mbps; OFF = 10 Mbps
LINK/ACT: Steady On for LINK with no traffic, blinking indicates port
is transmitting / receiving.
F/H: ON = full-duplex, OFF = half-duplex
Agency Approvals
UL Listed (UL 1950), cUL, CE
Emissions: meets FCC Part 15, Class B
Warranty: Three years, return to factory Made in USA