GarrettCom PS14P Switch User Manual


 
S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06)
24
www GarrettCom com
..
Note: The 8-15vdc option is also present, but can only be used to power the PS14P unit
when no PoE devices are attached. While using a 12vdc Adaptor to power on the switch,
the unit will not function as a PoE power source switch but as a non-PoE switch only.
2.3 Magnum PS14P & S14-Series, with four (RJ-45) Copper ports
The Magnum S14-Series & PS14P chassis house one main PC board. The power
supply is an external AC unit or internal DC via a screw terminal block. The front side of
the chassis has three twisted-pair switched ports and one port is provided on the rear side.
All four ports of the S14-Series convenient switch support auto-cross (MDIX), and perform
the auto-cross in the auto-negotiation mode only.
Dual LEDs indicating the operating status of ports are mounted on the top as well
as end for convenience and may be viewed from any direction. There are power (PWR)
indicators for the unit to validate that the unit is turned ON. For each port, there are Link