6
GR585 F1 specifications
Technical specifications
PCIe
®
specifications
The primary I/O bus for the main board is PCIe Gen2. The following table lists the characteristics of the PCI-
E bus segments. Details about each bus segment follow the table.
NOTE: The signaling bit rate of PCI Express is 2.5Gbit/s one direction per lane for Gen 1 and 5.0Gbit/s one
direction per lane for Gen 2.
Expansion
slot
Number Type Bus
width
1
Voltage Connector Location Length
PCIe x16 2 PCIe
Gen2
x16 3.3V x16 Onboard Low-profile
PCIe x8
1
Up to 2 PCIe
Gen2
x8 3.3V x8 Onboard Low-profile
Flex I/O
1
1 PCIe
Gen2
x8 3.3V x8 Onboard Low-profile
NOTE:
1. If the Flex I/O slot is used, the second PCIe x8 cannot be used.
2. Indicates the number of physical electrical lanes running to a PCIe
®
connector.
2. Default bus assignment (in decimal). Inserting cards with PCI™ bridges may alter the actual bus
assignment number.
3. Slots are enumerated differently based on the operating system. Microsoft® operating systems enumerate
Device ID by bus starting from the lowest bus to the highest.
Onboard storage specifications
Item Description
Controller AMD
®
SP5100 SATA controller
Simultaneous drive transfer channels 6 onboard SATA ports
Max throughput per channel 3 Gb/s
Data transfer method
• Non-RAID mode
• RAID mode (Adaptec RAID driver)
Drive type supported Serial ATA
RAID levels support
• RAID 0, 1, 10 (Adaptec software RAID)
RAID function support
Supports multiple logical volumes
Setup through ROM based Array Configuration Utility
Installation scripting support
NOTE: This controller does not support LED functions
RAID OS support
•
Windows Server 2008
• Windows Server 2008 R2
• Windows Server 2003
• Red Hat Enterprise Linux 5.4