Filter
Top Products
0
4
SET UP
Caution! Shredders are heavy equipment (see
“Total Unit Weight” in the “Specifications”
section of this Manual). To insure proper
installation and avoid injury, GBC recommends that
two people set up this unit.
FIGURE 1. Begin by opening the cabinet door by
pulling the handle. Place the shredder head onto
the top of the cabinet as illustrated.
FIGURE 2. Insert the enclosed plastic bag in the
pull-out waste receptacle. First, pull out the waste
receptacle (1) and remove the red round belt (2).
Turn over the top of the bag several times (3),
insert the plastic bag in the waste receptacle and
fasten with the round belt (4). Push the waste
receptacle into the cabinet and close the cabinet
door (5).
FIGURE 1
FIGURE 2
!
1
2
3
4
5
3890 shredder 3/14/05 10:09 AM Page 4