Filter
Top Products
Troubleshooting
12
A
B
Symptom Corrective Action
Machine will not start. Plug unit in.
Switch unit to Power On by pressing the forward
button (green LED lights).
Feed paper in to the center of the feed opening
where the auto sensing photo cell is located.
Close the cabinet door.
Empty the shred bag.
Close safety guard.
Bag full indicator lights
but bag is not full.
Figure 17.
Unplug unit from electrical outlet.
Remover paper debris between the cutting head
from below with a brush (not included). Figure 18.
Figure 17.
Figure 18.