Filter
Top Products
68K System Monitor
User's Guide
GE Energy Services
General SWM0023-1.00 -2
Full Release
3-35
ETH - Ethernet Address
Platform
o
CPM
o
D20
D20 Base
o
D20 ME
D20 Base
o
D20/200
CCU Base
o
D20/200 ME
CCU Base
o
D25
Description
Use this command to change the Ethernet address of a D25’s hardware interfaces.
Syntax
Below is usage and syntax information for this command
Command Format
eth /(d | u) [b1 b2 b3 b4 b5 b6]
Variables
/d = display address
/u = update address
Parameters
[b1 b2 b3 b4 b5 b6] = 6 byte Ethernet address
Example
Nor required
Special
Considerations
Do not use unless qualified.
Address change is permanent, and will stay in D25 XCOM
hardware even if moved to another D25.