Filter
Top Products
Connecting and Operating the 6x2 HDMI Switcher
How to Connect the 6x2 HDMI Switcher to your devices
1 Connect the supplied cables from the HDTV sources into the 6x2 HDMI Switcher inputs.
2 Connect the cable from your display (monitor or projector) into the HDMI outs of the
6x2 HDMI Switcher.
3 Connect any Digital Audio Receiver into the Toslink out of the 6x2 HDMI Switcher
3 Plug the 5VDC power supply into the 6x2 HD Switcher.
*Note: TOslink is only enabled if you are using an HDMI source and an HDMI display,
otherwise the source goes into DVI mode by reading the DVI display EDID, and at the
moment, the ABC buttons are not enabled on the remote.
How to Control the 6x2 HDMI Switcher
Use the RMT6-IR remote control to toggle between sources.
5