Filter
Top Products
5
5
CONNECTING AND OPERATING THE DVI FM500 EXTENDER
How to Connect the DVI FM500 Extender
Connecting the DVI FM500 Extender System
1. Record the monitor’s EDID using the instructions on the next page.
2. Connect the DVI FM500 Extender sender unit to the DVI source device.
3. Connect DVI FM500 Extender receiving unit to the DVI display.
4. Connect the DVI FM500 Extender sender and receiving units together using a user supplied LC
terminated single or multi-mode fi ber optic cable.
NOTE: This unit will only operate with LC terminated single or multi-mode fi ber optic cable.
5. Connect one of the included 5V DC power adapters to the DVI FM500 receiving unit.
6. Power on the DVI source.
NOTE: If the source does not supply the required 5V of operational power to the DVI FM500 Extender
sender unit, the second included power supply must be attached to the sender unit.
How to Connect the DVI FM500 Extender
Connecting the DVI FM500 Extender System
1. Record the monitor’s EDID using the instructions on the next page.
2. Connect the DVI FM500 Extender sender unit to the DVI source device.
3. Connect DVI FM500 Extender receiving unit to the DVI display.
4. Connect the DVI FM500 Extender sender and receiving units together using a user supplied LC
terminated single or multi-mode fi ber optic cable.
NOTE: This unit will only operate with LC terminated single or multi-mode fi ber optic cable.
5. Connect one of the included 5V DC power adapters to the DVI FM500 receiving unit.
6. Power on the DVI source.
NOTE: If the source does not supply the required 5V of operational power to the DVI FM500 Extender
sender unit, the second included power supply must be attached to the sender unit.
CONNECTING AND OPERATING THE DVI FM500 EXTENDER