Filter
Top Products
5
PANEL DESCRIPTIONS
1 I/R Receiver
Receives I/R signal from the handheld Infrared remote control unit included with the 2x2
DVI KVM Switch.
2 LED Input Status Indicator 1 & 2
This currently selected source input will be indicated with an active LED.
3 Input Selector Button
Pressing this button will cycle the input, 1 or 2, which will be selected for output.
4 Power Indicator
This LED indicator will glow bright red when the power is turned on.
5 5V DC Locking Power Connector
Connect the included 5V DC locking power supply to this connector.
6 DisplayPort Input
This port will accept a single standard DisplayPort source device. Four ports are available
for use.
7 DisplayPort Output
This port will accept a single standard DisplayPort output device. The currently selected
DisplayPort input source will be output via this port.
8 Audio Input Connector (3.5 mm Mini Stereo)
Connect audio source device to this port using the 3.5mm mini stereo cable. There are
two ports available and they are associated with display port inputs 1 & 2 respetively.
9 Audio Output Connector (3.5mm Mini Stereo):
Connect Audio devices to these ports usin 3.5 mm mini-stereo cables. Audio will output for
the currently selected input source.
10 IR Extender Port:
Connect IR extender reciever (EXT-RMT-EXT-IR) to this port.
11 USB Out Port (1-2):
Connect USB devices to these ports. There will be two ports available for simultaneous
connection of the two USB devices.
12 USB In Port (1-2):
Connect USB source devices to these ports. There are two ports available for use and
are associated with DisplayPort inputs 1 & 2, respecitvely.
13 RS-232 Serial Port
This port is used for serial communication using and RS-232 controll deviice. For more
details, refer to page 16.
14 Console Control Switch Port
This port is used for contact closure-type remote control.