Filter
Top Products
18
RS-232 COMMANDS
#SET_USER_NAME Command
The #SET_USER_NAME command sets the Telnet user name.
Syntax:
#set_user_name param1
Parameters:
param1 String
Notes:
The maximum length of the username string is 20 characters.
#SGATEWAY Command
Specifi es the new IP gateway. Dot-decimal notation must be used when specify-
ing the IP address. A reboot is required after the new IP gateway address has
been assigned.
Syntax:
#sgateway param1.param2.param3.param4
Parameters:
param1 Gateway address [0 - 255]
param2 Gateway address [0 - 255]
param3 Gateway address [0 - 255]
param4 Gateway address [0 - 255]
Example:
#sgateway 192.168.1.1