Filter
Top Products
1
OPERATION NOTES
INTRODUCTION
READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE 2X VGA EXTENDER
• Resolutions up to WUXGA (1920 x 1200) are supported.
• Maximum extension of CAT-5 or CAT-5e distance of 1000 feet (300 meters).
• Display information (EDID) is not sent back to the source. Standard VESA
resolutions should be output by most computers without the need of an
EDID. If using a non-VESA standard resolution or if EDID is needed, an
EDID storage and relay device is necessary. Gefen recommends the use of
a DVI Detective (part# EXT-DVI-EDIDN) with two VGA to DVI adapters.
Congratulations on your purchase of the 2X VGA Extender. Your complete satis-
faction is very important to us.
Gefen
Gefen delivers innovative, progressive computer and electronics add-on solutions
that harness integration, extension, distribution and conversion technologies.
Gefen’s reliable, plug-and-play products supplement cross-platform computer
systems, professional audio/video environments and HDTV systems of all sizes
with hard-working solutions that are easy to implement and simple to operate.
The Gefen 2X VGA Extender
The Gefen 2X VGA Extender allows you to extend VGA video at great distances,
up to 1,000 feet from the video source. A single industry-standard CAT5 cable
is used to carry the video signal. The 2X VGA receiver unit has two VGA video
outputs, so you can connect more than one monitor if so desired at the remote
location.
How It Works
You simply hook up the 2X VGA sender unit to your VGA video source using
the supplied 6-foot VGA mating cable, then run your CAT-5 cable to the 2xVGA
Receiver unit. At the remote end, connect your display(s) to the 2X VGA Receiver
and your video will be extended fl awlessly.