Filter
Top Products
1 of 2
Pre-Wired Automatic Transfer Switch
with Built-In Load Center
Pre-Wired Switch
®
Pre-Wired
Switch
250 VAC, NEMA 1
DESCRIPTION
The Generac pre-wired switch is designed to operate with 8-17kW air-cooled generators. This transfer switch has an integrated
load center for picking up the emergency circuits. It is especially useful where the main service is large and only a portion of the
building load will be served by the generator. It is available with a built-in 10, 12, 14 or 16-circuit load center to supply only those
circuits that are essential during an emergency. All standard and load center transfer switches are CUL Listed and suitable for use in
optional standby systems (NEC702).
STANDARD FEATURES
All pre-wired switches are housed in a steel NEMA 1 enclosure, with electrostatically applied and baked powder paint. The Heavy
Duty Generac Contactor is a UL recognized device, designed for years of service. The controller at the generator handles all the
timing, sensing and exercising functions.
Model RTG10EZA1 – 50 Amp, 10 Circuit Switch
Model RTG12EZA1 – 50 Amp, 12 Circuit Switch
Model RTG14EZA1 – 100 Amp, 14 Circuit Switch
Model RTG16EZA1 – 100 Amp, 16 Circuit Switch
CONTACTOR RATING
The transfer switch contactor is rated at 250 VAC and is available in a single phase configuration only.