Filter
Top Products
The DBR-200 Relay module is worked when power input then
contacts will change over from N/C (Normally Close) to N/O
(Normally Open)
The ABD-110 timer allows for timed or latched functions of the
relay. In timer mode, the unit can in a x1 mode, (the timer is set
between 1 and 60 seconds.) Or a x10 mode (the timer is set
between 10 and 600 seconds.) In latch mode, the timer does
not apply, and the relay will remain energized unit a short is
applied between the reset terminals.
DC voltage averagely distributed to five output contacts, each
with PPTC re-settable fuse protection based on the dynamic
equilibrium of energy. Each OUTPUT is protected by individual
PPTC from over current; therefore each load of output may not
exceed 1AMP.
DBR-200
Relay Board
ABD-110
Timer Board
GPD-3015
Voltage Distribution Board
Useful Gadgets
GIANNI INDUSTRIES, INC.
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
&
The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
Warranty
Power Input: 8~30VAC or 11~30VDC
Current: 45mA@ 12VDC
Relay Output: Relay rated:
5A @ 24VAC, 5A@30VDC
Copyright 2007 Gianniindustries, inc.All rights reserved.
DM-CA-UG Ver. B Published on 2008.05.19
No. 13, Zhong Sing Road, Tu-Cheng IndustrialZone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw