Filter
Top Products
- 31 - BIOS Setup
English
Top Performance
If you wish to maximize the performance of your system, set "Top Performance" as "Enabled".
Disabled Disable this function. (Default Value)
Enabled Enable Top Performance function.
"Top Performance" will increase H/W working speed. Different system configuration (both H/W
component and OS) will effect the result. For example, the same H/W configuration might not run
properly with Windows XP, but works smoothly with Windows NT. Therefore, if your system is not
perform enough, the reliability or stability problem will appear sometimes, and we will recommend you
disabling the option to avoid the problem as mentioned above.
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
` Standard CMOS Features
` Advanced BIOS Features
` Integrated Peripherals
` Power Management Setup
` PnP/PCI Configurations
` PC Health Status
` Frequency/Voltage Control
Top Performance
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
ESC: Quit KLJI: Select Item
F8: Q-Flash F10: Save & Exit Setup
Top Performance
Disabled.........................[]
Enabled..........................[ ]
KL: Move ENTER: Accept
ESC: Abort
AGP Clock (MHz)
Please set AGP Clock according to your requirement.
Incorrect using it may cause your system broken. For power End-User use only!
PCI Clock (MHz)
Please set PCI Clock according to your requirement.
Incorrect using it may cause your system broken. For power End-User use only!
AGP Voltage Control
Normal Set AGP Voltage Control to Normal. (Default value)
+0.1V Set AGP Voltage Control to +0.1V.
DRAM Voltage Control
Normal Set DRAM Voltage Control to Normal. (Default value)
+0.1V Set DRAM Voltage Control to +0.1V.