Filter
Top Products
GN-BTD01 Bluetooth User’s Guide
LAP Server Setup (Windows 98SE and Windows Me)
Internet Protocol routing software (e.g., WinRoute Lite) is required on
Windows98SE and Windows Me servers.
1) Click the Start button and then select “Settings”, and “Control Panel”.
2) Double-click the “Network” icon.
3) Click the “Configuration” tab in the Network window and select
“TCP/IP->Bluetooth LAN Access Server Driver” entry and then click
the Properties button.
4) Click the “IP Address” tab in the TCP/IP Properties window.
5) Choose the “Specify an IP address” option.
6) Enter an IP Address (Suggested value is 192.168.0.1) and a Subnet Mask
(Suggested value is 255.255.255.0).
7) Click OK in the TCP/IP Properties window and then in the Network
window.
8) Click YES in the System Setting Change dialog box to restart the
computer.
Next, Configuration the routing software
1) Right-click the WinRoute icon located in the Windows system tray and
select Administrator…option. The WinRoute Lite Administration control
panel will be displayed.
2) On the Setting tab, select the “2nd networking adapter” radio button.
3) From the “Network adapter” drop-down list, choose any adapter.
4) Click the Settings… button. The Advanced Setting dialog box will be
displayed.
5) On the DHCP tab, in the “Adapter” drop-down list, choose any adapter.
6) Select the “Enable DHCP Server” checkbox.
7) “Assign IP address to Client in range”, e.g., From: 210 To: 240.
8) Click OK to save the setting.
After the settings are configured, verify that WinRoute Lite is active. The
WinRoute icon has two states: engine started and engine stopped.
16