77
Appendix
We use GA-8ITXR motherboard and Flash841 BIOS flash utility as example.
Please flash the BIOS according to the following procedures if you are now under the DOS mode.
Flash BIOS Procedure:
STEP 1:
(1) Please make sure you have set "Auto" for BIOS Setup (BIOS Flash Protection). For more detail
please refer to page 31.
(2) Please make sure your system has installed the extraction utility such as winzip or pkunzip.
Firstly you have to install the extraction utility such as winzip or pkunzip for unzip the files. Both of
these utilities are available on many shareware download pages like http://www.shareware.cnet.
com
STEP 2: Make a DOS boot diskette. (See example: Windows 98 O.S.)
Beware: Windows ME/2000 are not allowed to make a DOS boot diskette.
(1) Go to the DOS command prompt in MS-DOS or Windows 9x and, with an available floppy disk
in the floppy drive. Please leave the diskette "UN-write protected" type. Double click the "My
Computer" icon from Desktop, then click "3.5 diskette (A)" and right click to select "Format (M)