Filter
Top Products
GA-945PLM-(D)S2 (rev. 2.1) Motherboard - 16 -
English
1-5 Installation of Expansion Cards
You can install your expansion card by following the steps outlined below:
1. Read the related expansion card's instruction document before install the expansion card into the
computer.
2. Remove your computer's chassis cover, screws and slot bracket from the computer.
3. Press the expansion card firmly into expansion slot in motherboard.
4. Be sure the metal contacts on the card are indeed seated in the slot.
5. Replace the screw to secure the slot bracket of the expansion card.
6. Replace your computer's chassis cover.
7. Power on the computer, if necessary, setup BIOS utility of expansion card from BIOS.
8. Install related driver from the operating system.
For example: Installing a PCI Express x16 VGA card:
When removing the graphics card, gently push
back on the black lever on the slot and then lift
the card straight out from the slot.
When installing the graphics card, push down
on the top edge of the card until it is fully
inserted into the PCI Express x16 slot. Make
sure the card is securely seated in the slot
and does not rock.