Filter
Top Products
BIOS Setup- 35 -
English
Password Check
System The system can not boot and can not access to Setup page will be
denied if the correct password is not entered at the prompt.
Setup The system will boot, but access to Setup will be denied if the correct
password is not entered at the prompt. (Default value)
Init Display First
This feature allows you to select the first initiation of the monitor display from which card when you
install a PCI card and a PCI Express VGA card on the motherboard.
PCI Slot Set Init Display First to PCI VGA card.
Onboard VGA Set Init Display First to onboard VGA.
PEG Set Init Display First to PCI Express VGA card. (Default value)
Frame Buffer Size
16M Set frame buffer size to 16MB.
32M Set frame buffer size to 32MB.
64M Set frame buffer size to 64MB. (Default value)
128M Set frame buffer size to 128MB.
Disabled Disable this function.
Onboard GPU
Enable If No Ext PEG Onboard GPU will be disabled if there is a graphics card on the PCI
Express slot. (Default value)
Always Enable Onboard GPU will always be enabled whether there is a graphics card
on the PCI Express slot or not.