Gigabyte GA-K8NE-RH Network Card User Manual


 
Hardware Installation- 11 -
English
Hardware Monitor System voltage detection
CPU temperature detection
CPU / System fan speed detection
CPU warning temperature
CPU fan failure warning
CPU smart fan control
(Note 3)
Onboard SATA RAID Onboard nForce4(-4X) chipset (SATAII0_1, SATAII2_3)
- supports data striping (RAID 0) or mirroring (RAID 1) function or
striping + mirroring (RAID 0+1)
- supports data transfer rate of up to 150 MB/s
- supports hot plugging function
- supports a maximum of 4 SATA connections
Supported on the Win 2000/XP operating systems
BIOS Use of licensed AWARD BIOS
Supports Q-Flash
Additional Features Supports @BIOS
Supports EasyTune
(Note 4)
Overclocking Over Voltage via BIOS (DDR)
Form Factor ATX form factor; 30.5cm x 22.4cm
(Note 3) Whether the CPU Smart FAN Control function is supported will depend on the CPU you install.
For more detailed information please check at the FAQ section on GIGABYTE's website.
(Note 4) EasyTune functions may vary depending on different motherboards.