Gigabyte GA-M68MT-D3P Computer Hardware User Manual


  Open as PDF
of 40
 
BIOS Setup - 24 -
Date (mm:dd:yy)
Sets the system date.
Time (hh:mm:ss)
Sets the system time.
IDE Channel 0, 1, 2, 3 Master
IDE HDD Auto-Detection, IDE Auto-Detection
Press <Enter> to autodetect the parameters of the SATA device on this channel.
IDE Channel 0, 1 Master, Extended IDE Drive
CongureyourSATAdevicesbyusingoneofthethreemethodsbelow:
•Auto Lets the BIOS automatically detect SATA devices during the POST. (Default)
•None If no SATA devices are used, set this item to None so the system will skip the
detection of the device during the POST for faster system startup.
•Manual Allowsyoutomanuallyenterthespecicationsoftheharddrivewhentheharddrive
access mode is set to CHS. (For IDE Channel 0, 1 Master only.)
Access Mode Sets the hard drive access mode. (Default: Auto)
Thefollowingeldsdisplayyourharddrivespecications.Ifyouwishtoentertheparametersmanually,
refer to the information on the hard drive.
Capacity Approximate capacity of the currently installed hard drive.
Cylinder Number of cylinders.
Head Number of heads.
Precomp Write precompensation cylinder.
Landing Zone Landing zone.
Sector Number of sectors.
Halt On
Allows you to determine whether the system will stop for an error during the POST.
Options are: "All Errors," "No Errors," "All, But Keyboard" (default), "All, But Diskette," "All, But Disk/Key."
Memory
Theseeldsareread-onlyandaredeterminedbytheBIOSPOST.
 previous next