Filter
Top Products
GA-VM800PMC Motherboard - 32 -
English
2-2 Advanced BIOS Features
Init Display First
This feature allows you to select the first initiation of the monitor display from which card when you
install a PCI card and a PCI Express VGA card on the motherboard.
PCI Slot Set Init display first to PCI Slot. (Default value)
Onboard/AGP Set Init display first to Onboard/AGP.
VGA Share Memory Size
Disabled Disable this function.
16M Set VGA share memory size to 16 MB.
32M Set VGA share memory size to 32 MB.
64M Set VGA share memory size to 64 MB. (Default value)
Hard Disk Boot Priority
Select boot sequence for onboard(or add-on cards) SCSI, RAID, etc.
Use < > or < > to select a device, then press<+> to move it up, or <-> to move it down the list.
Press <ESC> to exit this menu.
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
Advanced BIOS Features
Init Display First [PCI Slot]
VGA Share Memory Size [64M]
` Hard Disk Boot Priority [Press Enter]
First Boot Device [Floppy]
Second Boot Device [Hard Disk]
Third Boot Device [CDROM]
Password Check [Setup]
CPU Hyper-Threading
(Note)
[Enabled]
Limit CPUID Max. to 3
(Note)
[Disabled]
No-Execute Memory Protect
(Note)
[Enabled]
CPU Enhanced Halt (C1E)
(Note)
[Enabled]
CPU Thermal Monitor 2(TM2)
(Note)
[Enabled]
CPU EIST Function
(Note)
[Enabled]
Virtualization Technology
(Note)
[Enabled]
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level`
(Note) This item will show up when you install a processor that supports this function.