Gigabyte GC-RAMDISK Computer Drive User Manual


 
- 6 -
English
General Precautions:
The memory size available will be less than the total size of the installed memory.
When the system is set to RAID mode, the RAID controller might occupy some disk space as
buffer. For example, when the ICH7R RAID controller is set to RAID 0 or RAID 1, the total hard
drive capacity will be 512MB~1GB less than the actual capacity.
For users who wish to install operating system in i-RAM, please prepare the minimum free hard
disk space for the operating system.
To protect data integrity and extend battery lifespan, it is not recommended that you unplug the
AC power cord of the power supply.
Important Battery Information:
Please do not remove the battery. If the battery appears to be damaged or does not function
properly, please contact the place of purchase for further checking.
i-RAM memory sockets are powered on after the battery is charged, please handle with care to
prevent short circuit and damage.
Do not dispose of the battery in fire. To avoid injuries or causing fire hazard, please do not
disassemble or touch battery terminals with metal objects or your fingers.
The 4-level LED battery capacity indicator located in the lower left corner of the i-RAM shows
about how much charge is left. The more the LEDs light up, the more power remain in the
battery. Press and hold the red battery capacity indicator button to show the battery charge level
(Optional).
Data Loss Preventions:
To prevent data from being lost or damaged, read the following guidelines:
Do not remove i-RAM from the PCI slot or remove the AC power from the power supply for too
long.
Do not remove the installed memory module(s) from i-RAM.
Do not remove i-RAM from the PCI slot and also detach the battery.
Please back up the data in i-RAM regularly using either GIGABYTE's backup tool (please
download it from GIGABYTE's website at http://www.gigabyte.com.tw) or third-party backup
utilities. Please note that data in i-RAM is not covered under the warranty.