Gigabyte GN-A11G Network Card User Manual


 
GN-A11G Wireless LAN Access Point
Primary RADIUS server Please assign an IP address to the primary RADIUS
server (authentication server).
Authentication Port The setting range is 1~65536 and the default value is
1812.
Authentication sercet This field can key in up to 256 character.
Re-Keying Under this option two setting are possible: “enable” or
“disable”. Under this option two setting are possible:
“enable” or “disable”. The default value is “enable”.
Verify the desire setting and then click the “Apply” button to set the value into
access point.
64 (40) Bits / 128 (104) Bits
There are two levels of encryption 64 bits and 128 bits. The 64 bits
encryption is referenced as a lower level encryption. The 128 bits encryption
is referenced as a higher level encryption.
The 64 bits WEP encryptions use 40 bits as a secret key, which can
controlled by user, and 24 bits as the initialize vector. These two portions
plus together is 64 bits encryption. Some other vendor’s product might refer
as 40 bits encryption. It is the same thing.
The 128 bits encryption uses 104 bits as a secret key, which can be
controlled by user, and 24 bits as the initial vector.
27