Filter
Top Products
9
English
4 Installation Instruction
Please follow the reference sections in order for installation.
4-1 Installation of Power Supply
To facilitate the installation, it is recommended to place the 3D AURORA casing upright on the
table.
Required tools: power supply securing screws x 4.
4-2 Installation of Motherboard
The 3D AURORA is compatible with the ATX/Micro ATX/Mini ATX/Flex ATX motherboard. Please
confirm the dimension and specifications of the motherboard before installation.
Required tool: motherboard standoffs x 9 and securing screws x 9
4-1-1 Remove the side panel.
Unscrew the thumbscrews of the side panel and
detach the panel by pressing the latch.
4-1-2 Place the power supply into the casing.
4-1-3 Use screws to secure the power supply from the rear
side.
4-1-4 For a larger power supply, please loosen the cross
bar screws first, disassemble the bar, and then install
the power supply; fasten the screws to secure the
cross bar after installation.
cross bar