Filter
Top Products
GN8110-USB
User Guide
77 Northeastern Blvd. • Nashua, NH 03062 USA
1-800-826-4656 • www.gnnetcom.com
54-0137A
Printed in China
January 2001
System Requirements
The GN8110-USB requires the following operating systems:
• Windows 98 SE (Second Edition)
• Windows 2000
• Windows ME (Millennium Edition)
• Macintosh OS 9.0.4 or greater.
You must have an available USB port. The GN8110-USB does
not work with earlier releases of these operating systems.
For the latest information on compatibility and use of this
product, go to the GN Netcom USB informational site at
www.gnnetcom.com/usb.
General
For Windows ME or Macintosh OS 9.0.4: You do not need to
install any software. Simply plug the USB connector into
any USB port on the computer.
For Windows 98 SE and Windows 2000: To use the GN8110-
USB the first time, you need to install the USB drivers necessary
for the computer to recognize the device.
Connect the GN8110-USB to your
Computer - Windows 98 SE and 2000
Turn on your computer and let it complete the boot-up process.
Make sure that you are not running any applications.
Plug the USB connector from the GN8110-USB into any
available USB port on the computer. Your headset does not need
to be plugged in at this time. The first time Windows detects that
the device is connected, it recognizes that there is new hardware
required and automatically launches the Add New Hardware
Wizard.
The Add New Hardware Wizard will launch three (3) times,
installing the following drivers:
• USB Composite Device (INF\USB\INF)
• USB Human Interface Device (INF\HIDDEV.INF)
• USB Audio Device (INF\WDMA_USB.INF)
These drivers are typically pre-loaded in Windows. No additional
software is needed. If you upgraded your system to Windows 98
SE or Windows ME, you may need to use the upgrade disk during
this installation.
GN8110-USB Set Up
Bora Bora Final 1/15/01 1:46 PM Page 1