Filter
Top Products
18 GOSSEN METRAWATT GMBH
7.4 Recording: Duration and Type – durA, CYCLE
• Recording without Time Limits – durA
Key Sequence: SEt ... ... durA on oFF
Settings: oFF = time limiting disabled
Recording is continued until the memory is full. If the CYCLE function has been activated,
memory is overwritten in a cyclical fashion. See also drawing in chapter 7.3, page 16.
• Time-Limited Recording – durA
Key Sequence: SEt ... ... durA ON
dd
hh:mm
Settings: d = number of days (adjustable from 0 to 6)
hh = number of hours, mm = number of minutes
Recording is ended after the predetermined duration has expired.
See also drawing in chapter 7.3, page 16.
• Cyclical Recording – CYCLE
Key Sequence: SEt rAtE ... CYCLE OFF on
Settings: on = cyclical recording activated
When the memory is full, the oldest data are overwritten with new data (FIFO). See also
drawing in chapter 7.3, page 16.
• Record Until Memory is Full – CYCLE
Key Sequence: SEt ... ... CYCLE on OFF
Settings: OFF = cyclical recording deactivated
When the memory full, data recording is ended. See also drawing in chapter 7.3, page 16.
7.5 Internal Time – timE
• Set Current Weekday and Time (no date)
Key Sequence: SEt ... ... tiME dd hh:mm
Settings: dd = current weekday
hh:mm = current time in hours and minutes
Current weekday and time are set with this function.
7.6 Select Address and Modem Option – Addr, ModEM
Key Sequence: SEt ... ... Addr nn ModEM no YES
Settings: nn = 1 ... 15
ModEM = YES, if the adapter is
connected to the PC with a modem
If several memory adapters are connected to the PC, a separate address must be assigned
to each. Address number 1 should be assigned to the first adapter, address number 2 to the
second and so forth.
Note: If only one adapter has been connected, it should be set to address number 1.