Filter
Top Products
Innovative IP Voice & Video
.
www.grandstream.com info@grandstream.com GXW-410x Quick Install Guide
QUICK INSTALLATION AND CONFIGURATION
APPLICATION DESCRIPTION
GXW410x series can be deployed in the following enterprise topology:
Package and Installation
• Unpack and check all accessories included:
• one 12V universal power adapter,
• one Ethernet cable,
• one device unit.
WARNING: use only the power adapter included in the GXW-410x package. Using an alternative power adapter may permanently damage the unit.
Installation
1. Connect power and cables
2. Connect Ethernet cable to a hub and power adapter to power wall outlet
3. Assign GXW410x IP Address
4. Use another Ethernet cable to connect your PC to the same hub that GXW4100 is connected.
5. Assign your PC to a static IP that is within the same subnet of default IP address of GXW4100 192.168.0.160. i.e 192.168.0.x. X can be any number between 2 and 254
except 160.
6. Launch web browser and type http://192.168.0.160
at Address of web browser. This will let you to connect to build-in web server of GXW4100.
You may change to use DHCP or PPPoE connection or another static IP address according to your local network environment.
Simple Configuration As a Media Gateway to Access PSTN Networks
GXW410x can be configured to work with any leading SIP server, such as Asterisk, for a pure media gateway to access PSTN networks. In such applications, the user only needs to
configure GXW410xgateway Stage Dialing field and Sip Server field.
For a simple set-up, users only need to configure a SIP server field for default SIP Profile 1. This field should be configured to point to the SIP server to be used with the GXW410x.
For advanced applications, the user is required to choose at least one
SIP server field from the SIP profiles and one stage dialing under system Channel configuration table. On SIP
server sides, the SIP server must be configured to forward user PSTN calls to the GXW410x.
Please be aware that by default, the system uses North American PSTN settings and TWO STAGE dialing to access PSTN networks for VOIP to PSTN calls and PSTN to VOIP calls.
Two stage dialing means the end-user will hear dial-tone twice. First dial-tone is used to let users to input destination number in the same network of the calling networks. Second dial-
tone is used to let users to input final destination number.
The GXW410x also supports ONE STAGE dialing, which means users only need to input one final PSTN number when first dial-tone is heard for calls from VOIP to PSTN. This requires
configuring both SIP server and GXW410x to one stage dialing (see last section of quick guide and user manual for one stage dialing). For one stage PSTN to VOIP calls, user needs to
configure off-hook auto dial field (see last section on sample configuration)
Extensive Configuration for Multiple Users
PSTN
PSTN Analog Phones
301
IP-PBX
Or
SIP Registrar
FXO
lines
GXW4100
801
802
803
302
IP/LAN
IP/WAN
GXW-410x Configuration
VoIPon Solutions www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0) 1245 600560