12
Initial Operation
Initial operation
Insert batteries or rechargeable batteries
Open the rechargeable/battery compartment and insert the
rechargeable battery pack 466* or batterieschargeable battery pack 466* or batteries (Typ Micro / AAA,
2 x 1.5 V). Make sure the polarity is correct.
Charging of Rechargeable Batteries
WARNING
Danger of explosion and burns!
Recharge the batteries only in the dictation machine.
Do not use damaged batteries.
►
■
■
Insert the plug of the power supply only into power sockets
which provide the line voltage specified on the rating label. Oth-
erwise there is a danger of fire, explosion and overheating.
Disregarding these precautions means risking explosions
and burns.
After switching off the Digta 420, connect the power supply
475* to the PC/USB-jack of the Digta 420.
– Shortly afterwards, the load indicator will appear on the dis-
play, and the LED-indicator will start flashing green.
–
The rechargeable battery is fully charged after ca. 4 hours. The
load indicator will disappear, and the LED-indicator will go off.
Unplug the mains supply from the wall socket, and pull the USB-
socket of the mains supply cable out of the »PC/USB« socket.
The symbol » « will start flashing when the batteries or the
rechargeable batteries are low.
i
The operating with batteries, mains unit 475*,
rechargeable battery 466* and the charging of
a rechargeable battery in the Digta Station* is
described in the detailed user’s manual. You will
find this manual in the „Docu” directory on the
included CD.
■
►
►
►
* Extra equip
ment
Battery/rechargeable
battery compartment
Rechargeable battery
sensor contact