Filter
Top Products
3 - 2 4800p 2D Imager User’s Guide
Beeper Pitch – Good Read
The beeper pitch codes modify the pitch (frequency) of the beep the imager emits
on a good read.
Default = Medium.
Beeper Duration – Good Read
The beeper duration codes modify the length of the beep the imager emits on a
good read.
Default = Normal.
Number of Beeps – Good Read
The number of beeps of a good read can be programmed from 1 - 9. To change
the number of beeps, scan the bar code below and then scan a digit (1-9) bar
code and the
Save
bar code on the Programming Chart inside the back cover of
this manual.
Default = One.
Low (1600 Hz)
* Medium (3250 Hz)
High (4200 Hz)
* Normal Beep
Short Beep
Number of Pulses