HandHeld Entertainment 4600R Barcode Reader User Manual


 
4600rp, 4600g/4600r, 4800i User’s Guide 9 - 13
5. Finally, set up the ISBN check digit, which is a special position-weighted
modulo 11 checksum. The imager automatically invokes the ISBN
checksum for template rows that are:
1.) at least fourteen characters long,
2.) whose first four characters are the letters “ISBN,”
3.) whose last character is a check character, and
4.) when the modulo 11 check character “0123456789X” is programmed.
Please note that all these commands can be combined into a single serial
programming command:
OCRENA2,TMP”ISBNggggggggggggctCdddd hdddEtCdddd
hddddE”,GPG”0123456789-”,GPH”P\”,CHK”0123456789X”.
These commands can be encoded into the following Aztec Code symbol:
OCR Template Codes
Note: Reading more than three rows of OCR is not recommended. Contact the
factory if you have an application that requires reading four or more rows
of OCR.
One or more two-digit numbers and
Save
are required after reading this
programming symbol. Refer to the Programming Chart on the inside the back
cover of this manual.
Enter OCR Template
Enter User-Defined
Variable “h”
Enter User-Defined
Variable “g”