Filter
Top Products
User’s Manual
19
ERROR MESSAGE & POSSIBLE SOLUTIONS
§ CABLE NOT CONNECTED :
1. Check that the signal-cable is properly connected, If the connector is loose, tighten
the connector’s screws.
2. Check the signal-cable’s connection pins for damage.
§ INPUT NOT SUPPORT :
Your computer has been set to unsuitable display mode, set the computer to display
mode given in the following table.
FACTORY PRESET TIMING TABLE:
(Analog / Digital mode)
MODE RESOLUTION
HORIZONTAL
FREQUENCY (KHz)
VERTICAL
FREQUENCY (Hz)
1 640×480 @60Hz 31.469 59.94
2 640×480 @67Hz 35 66.667
3 640×480 @72Hz 37.861 72.809
4 640×480 @75Hz 37.5 75
5 720×400@70Hz 31.469 70.087
6 800×600 @56Hz 35.156 56.25
7 800×600 @60Hz 37.879 60.317
8 800×600 @72Hz 48.077 72.188
9 800×600 @75Hz 46.875 75
10 832×624 @74.6Hz 49.725 74.5
11 1024×768 @60Hz 48.363 60.004
12 1024×768 @70Hz 56.476 70.069
13 1024×768 @75Hz 60.023 75.029
14 1152×864 @75Hz 67.5 75
15 1152×870 @75Hz 68.681 75.062
16 1280×960 @60Hz 60 60
17 1280×1024 @60Hz 63.981 60.02
18 1280×1024 @75Hz
79.976
75.025
19 1400×1050@60Hz 64.744 59.948
20 1400×1050@75Hz 65.317 59.978
21 1600×1200@60Hz 75.00 60.00
*22 1600×1200@75Hz 93.750 75.00
23 1680×1050@60Hz 65.290 59.954
*24 1680×1050@75Hz 82.306 74.892
***DVI input source: Does not support modes 22,24.
PDF created with pdfFactory Pro trial version www.pdffactory.com