Filter
Top Products
26
ERROR MESSAGE & POSSIBLE SOLUTION
• CABLE NOT CONNECTED :
1. Check whether the signal-cable is properly connected. If the
connector is loose, tighten the connector screws.
2. Check the signal-cable’s connection pins for damage.
• OUT OF RANGE :
Your computer has been set to an unsuitable display mode. Set the com-
puter to a display mode from the tables on the following pages:
Screen image is not
centered or sized
properly.
• Adjust pixel frequency CLOCK and PHASE
or press hot-key (AUTO).
Picture has color
defects (white does
not look white)
• Adjust RGB color or select color
temperature.
Horizontal or vertical
disturbances on the
screen
• Use Windows 95/98/2000/NT/ME/XP;
"shut-down mode.
• Adjust CLOCK" and PHASE or perform hot-
key (AUTO).