Harbor Freight Tools 92708 Power Supply User Manual


 
SKU 92708 Page 6For technical questions, please call 1-800-444-3353.
Maintenance
1. Keep this unit clean and dry. Unplug the unit before cleaning. Clean only the
outside of this unit with a soft, dry cloth; never clean this unit with water or
harsh cleaners.
2. Aside from the fuse, this device does not contain any user replaceable parts. If
it needs service, take it to a qualified technician.
3. If the fuse needs replacement, simply disconnect the inverter, remove the fuse
cover on the back panel (see
Back
, page 5), remove the old fuse, and replace
it with another 40 Amp fuse of the same type. Replace the fuse cover and
reconnect the inverter before use.
Operation
1. Plug the 115 VAC device(s) you wish to power into the 3-prong AC Receptacles.
See
FRONT
above. The appliance(s) must not use more than 400 (total) watts
during continuous operation, otherwise it may overload the Inverter.
Caution: Some rechargeable appliances may damage the Power Inverter or
the appliance. When first using a rechargeable device, check the inverter’s
temperature for the first 10 minutes. If it becomes abnormally hot, do not use
this device with the Inverter.
2. Flip the Power Switch to the On (I) position to turn on. Do not use the appliance
until the green power LED indicator is on.
3. Turn on appliance. If an alarm sound is heard, turn off the appliance.
Caution: It is recommended that the vehicle be started every hour to recharge
the battery. Doing this will help prevent any unexpected shutdown of the
equipment. This will also help ensure that there will be enough battery power
to start the vehicle. Due to the risk of carbon monoxide inhalation (see
Warn-
ing
# 23 on page 4), do not run the vehicle’s engine within an enclosed area.
4. After use, disconnect the appliances, flip the Power Switch to the Off (O) position.
FRONT
Outlets
Power
Indicator
Switch