Filter
Top Products
C-TCB-26_INST_9-07
INSTALL INSTRUCTIONS C-TCB-26
2002-2008 FORD EXPLORER
TOOLS REQUIRED:
Torx Bit Set (T-55)
3/16” Allen wrench
3/8” Standard Socket Set
3/8” Metric Socket Set
3/8” Ratcheting Wrench
Powered drill
3/16” & 5/16” Drill bits
Open-end wrench set
HARDWARE:
QTY DESCRIPTION PART #
1 Pole support assembly CM93071-26W
1 Telescoping pole assembly CM93072-1
1 Side support brace CM93135
1 5/16” Nylock nut GSM30017
2 5/16” Flat washer GSM31006
1 5/16-18 x 1” Hex head bolt GSM33012
2 ¼” x ¾” Hex head lag bolt GSM33060-1
Always!
Read all instructions before installing any Havis-Shields Equipment Corp products.
Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
Use hardware provided with install kit
Location of factory
seat bolts
Side support
brace
Pole support
assembly
Telescoping
pole assembly