Filter
Top Products
ZIP TIE/PUSH PIN
*ADDITIONAL MOUNTING COMPONENT,
MOTION DEVICE, OR TUBE (NOT SHOWN)
IS MOUNTED ON THIS SURFACE*
STRAIN RELIEF
LOCATIONS
CUT HERE TO
REMOVE ZIP TIE
ILLUSTRATION A
(SHEET 2 OF 2)
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
WEIGHT: (LBS)
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
WEIGHT: (LBS)
THIS PRODUCT IS USED WITH THE PANASONIC
CF-28/29/30 TOUGHBOOK COMPUTERS.
(THE FEATURES OF THIS PRODUCT MAY BE LIMITED
DEPENDING UPON THE MODEL OF COMPUTER USED.)
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
WEIGHT: (LBS)
PRODUCT NAME
REV. DATE
DRAWING NUMBER:
NOTE: IT IS VERY IMPORTANT TO STRAIN RELIEF ALL CABLES
CONNECTED TO THE DOCKING STATION.
1. IF IT IS NECESSARY TO STRAIN-RELIEVE WIRES/CABLES, INSERT
ZIP TIE/PUSH PIN FROM HARDWARE KIT INTO ANY OF THE THREE
STRAIN RELIEF HOLES ON THE BOTTOM SIDE OF THE DOCK, AS
SHOWN. LOOP AND TIGHTEN ZIP TIE AROUND WIRES/CABLES, AS
REQUIRED.
2. IF STRAIN RELIEF MUST BE REMOVED AFTER INSTALLATION,
CUT ZIP TIE PORTION WHERE INDICATED IN ILLUSTRATION A. TO
RE-USE PUSH PIN FOR STRAIN RELIEF, INSERT A ZIP TIE THROUGH
OPENING IN PUSH PIN AND LOOP AROUND WIRES/CABLES, AS
REQUIRED.
NOTE: IF ORDERING AN EXTRA SET OF KEYS, REFER TO THE KEY
CODE NUMBER STAMPED ON THE KEYS. IF KEYS ARE NOT
AVAILABLE, PLEASE HAVE SERIAL NUMBER OF DOCK AVAILABLE
BEFORE CONTACTING HAVIS.
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
WEIGHT: (LBS)
DS-PAN-101
DOCKING STATION
01-30-07
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
WEIGHT: (LBS)
D3-0036-IS-G
PRODUCT DESCRIPTION
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
WEIGHT: (LBS)
PRODUCT NAME
REV. DATE
12-07-09
DRAWING NUMBER:
DS-PAN-101
INSTALLATION INSTRUCTIONS:
WARNING: ALL HAVIS INC. PRODUCTS ARE DESIGNED WITH SAFETY OF USE AND INSTALLATION IN MIND. HOWEVER,
IT IS THE SOLE RESPONSIBILITY OF THE OWNER/OPERATOR OF A VEHICLE USING HAVIS INC. MOUNTING AND
DOCKING EQUIPMENT, TO INSURE THAT THE EQUIPMENT IS INSTALLED SO THAT IT WILL NOT INTERFERE WITH VEHICLE
OPERATION, INTERFERE WITH SAFETY DEVICES, OBSTRUCT VIEW OF DRIVING CONDITIONS, OR IN ANY WAY
DEGRADE OCCUPANT SAFETY. IMPROPER INSTALLATION CAN CAUSE SERIOUS INJURY IN THE EVENT OF AN
ACCIDENT. INSTALLATION SHOULD ONLY BE PERFORMED BY QUALIFIED PROFESSIONALS. COMPUTERS AND
MOTION DEVICES MUST BE MOVED TO AND STOWED/SECURED IN THEIR SAFE DRIVING POSITIONS BEFORE
OPERATING VEHICLE.
WWW.HAVIS.COM
1-800-524-9900
F-730-019 REV A
6.6