Filter
Top Products
Step 1.
Step 2.
Step 3.
Step 4.
Step 5.
Place the H-GS5T on a smooth surface.
Connect the Power Adapter to the unit. (At this
point, do not plug the adapter into the outlet.)
Connect a server, workstation, or PC to the
switch using a standard RJ-45 Ethernet cable.
(For best results, use a CAT 5E cable.)
Repeat Step 3 as necessary for the remaining
ports. Also, if needed, another hub/switch can be
connected to any port on the unit.
Ensure that each device is connected properly.
Plug the power adapter into the power outlet.
Note: Make sure that there is proper heat dissipation from
and adequate ventilation around the switch.
11