Filter
Top Products
Connecting to the Network
Connect RJ-45 port of the CardBus 10/100
Ethernet PC Card Adapter to the Category 5
Network cable before loading any network driver.
For operation in the 100Mbps (100Base-TX)
Ethernet network, a Category 5 unshielded
twisted pair (UTP) cable should be used to
connect between the RJ-45 port and 100Mbps
hub/switch.
For operation in the 10Mbps (10Base-T)
Ethernet network, Category 3 or 5 unshielded
twisted pair (UTP) cable could be used to
connect between the RJ-45 port and a 10Mbps
hub or switch.
LED Indicators
1. LINK 10 LED indicator: glows green when
operated in the 10Mbps Ethernet network.
2. LINK 100 LED indicator: glows green when
operated in the 100Mbps Ethernet network.
3. ACT LED indicator: blinks orange when the
CardBus 10/100 Ethernet Attached Port PC
Card Adapter is transmitting/receiving data.
- 5 -