Filter
Top Products
and then click SAVE. The device will save the information, restart and return to
the previous menu page. If you don’t see the saved information on the screen
from the menu on the left, click on the “Global Port” to refresh the screen.
Username
The maximum input is 52 alphanumeric characters (case sensitive).
Password
The maximum input is 36 alphanumeric characters (case sensitive).
Auto-
disconnect
if idle for x
minutes
Configure this device to disconnect the PPPoE connection when
there is no activity for a predetermined period of time.
• Default: 5 minutes. You can input any number from 0 to
65535
• To ensure that the line is always connected, set the number
to 0.
Service
Name
For identification purposes. If required, your ISP will provide you
with the information.
Max packet size (TCP MSS): Click the down arrow to select the
most appropriate MSS (maximum segment size; default value is
1452) for your application. Reducing the packet size can enhance
connection to certain web sites or speed up packet transfer rate.
NOTE: If the incorrect selection is chosen, you may not be able to
open certain web sites.
Static IP
Address
Enter the IP address provided by your ISP.
Auto-
reconnect
Check to enable auto-reconnect with the PPPoE line. This function
allows the device to automatically reconnect when the line is
disconnected due to an ISP problem.
Static DNS
Server
Enter the primary and secondary DNS addresses provided by your
ISP.