Filter
Top Products
DIVA T/A PC Card User’s Guide 15
Windows NT 4.0
Note: Before you begin installing the DIVA T/A, we suggest that the
Remote Access Service (RAS), also known as Dial-Up Networking, be
installed with at least one modem (any modem will do; it is only
needed to install the DIVA T/A and can later be removed).
1
Shutdown Windows NT and turn off your PC. After connecting
the cables (see “Connecting the Cables” on page 8), insert the
DIVA T/A, label side up, into the PC Card slot.
2
Start your computer and allow Windows NT to start.
3
Insert the DIVA T/A CD into your computer's CD drive.
4
From the Start menu, go to Settings, then Control Panel. The
Modem Properties screen opens. Click Add.