Filter
Top Products
EN
Printer control panel lights
7
English
Manual feed
The printer is in manual
feed mode.
Check that you have loaded the
correct paper, then press and
release the
Go
button on the
printer control panel to print. If
you do not want to be in manual
feed mode, change the setting
from your printer properties.
Door open, no toner
cartridge, or paper jam
The printer is in an error
state.
Check the following:
●
The printer door is closed.
●
The toner cartridge is
correctly installed in the
printer.
●
There are no paper jams.
Paper out
The printer is out of
paper.
Load paper into the printer.
Memory out
The printer ran out of
memory in the middle of a
print job.
The page being printed may
have been too complex for the
memory capacity of the printer.
Press and release the
Go
button
to print.
Reset/Printer
initialization
The printer memory is
being reset and all
previously sent print jobs
are being purged. Or, a
printer initialization is
taking place.
No action is necessary. However,
you can reset the printer if you
press and hold the
Go
button for
5 seconds.
Fatal error
All lights are on.
●
Reset the printer.
●
Turn the printer off and then
back on.
●
Contact HP Support.
Printer control panel light messages (continued)
Light status Condition of the
printer
Description and required
action