Filter
Top Products
4
EN
Installing the software
General
Before installing the software, verify the following:
●
At least 8 MB or more of RAM is installed on your PC (16 MB
recommended).
●
There is at least 20 MB of free hard disk space on your PC.
●
All applications are closed on your PC before beginning
installation. (A system reboot may be required after the software
is installed.)
• Windows 9x & NT 4.0: No icons should appear on the taskbar.
• Windows 3.1x: Press Alt+Tab. Only the Program Manager
should appear.
Windows
®
9x & NT
®
4.0
1 Insert the CD into the disk drive on your PC. The installation will
automatically begin.
• If the installation does not automatically begin, click Start, and
then click Run. Type D:\setup in the command line. If your CD
drive is not D, type the correct drive letter.
2 Follow the instructions on the screen to complete the installation.
Windows 3.1x
1 Insert the CD into the disk drive on your PC.
2 In the Windows Program Manager screen, pull down the File
menu and click Run.
3 Type D:\setup in the command line (D=the letter for your CD
drive).
4 Follow the instructions on the screen to complete the installation.