Filter
Top Products
LaserJet 1150 series printe
r
HP Parts Reference Guide™
www.hp.com/go/hpparts
Paper Path Parts
Guide
67
RM1-0682-000CN Front guide assembly - Ribbed plastic piece that runs the width of the printer - Mounts to the front of the left and right
side plates
Paper Feeder
68
RM1-0721-000CN Paper feed guide assembly - Support structure for the tranfer roller - Black plastic frame with metal guide plates and the
left high voltage contact springs for the toner cartridge - Mounts behind the paper pick-up assembly (below the toner
cartridge)
Paper Pick-Up
69
RM1-0531-000CN Paper pick-up assembly - Includes the pick-up roller, paper feed roller assembly, separation pad, plastic housing and
other associated parts - Mounts in the bottom of the printer
Roller
70
RL1-0303-000CN Paper Pickup Roller ('D' shaped roller) - Picks up media from the paper input tray - Clips in the holder on the paper
pickup shaft
71
RM1-0550-000CN Transfer roller assembly - Transfers static charge to the media being printed on - Mounts in the top of the paper feed
guide assembly
Paper Pick-Up Assy Parts
Foot
72
RA0-1003-000CN Rubber foot - Used for the rear feet on the bottom of printer - Mounts on the front bottom frame of the paper pick-up
assembly (two used)
Gear Assembly
73
RM1-0551-000CN Gear/clutch assembly (Solenoid activiated) - Includes the two gear bodies and internal spring - Drives the pickup roller in
the paper pickup assembly
Holder
74
RG0-1019-000CN Roller and holder assembly - Spring loaded roller in a black plastic holder assembly - Rolls against the paper feed rollers
(2 used) - Mounts on top of the paper pick-up assembly
Lift Plate
75
RM1-0532-000CN Lift plate assembly - Quartz Gray plastic plate with two Blue paper width adjusters - Mounts on the top front of the paper
pick-up assembly
Pad
76
RF0-1014-000CN Separation pad assembly - Mounts on a spring loaded arm in the paper pick-up assembly
Paper Pick-Up
77
RM1-0531-000CN Paper pick-up assembly - Includes the pick-up roller, paper feed roller assembly, separation pad, plastic housing and
other associated parts - Mounts in the bottom of the printer
Roller
78
RL1-0303-000CN Paper Pickup Roller ('D' shaped roller) - Picks up media from the paper input tray - Clips in the holder on the paper
pickup shaft
Sensor
79
RM1-0572-000CN Paper sensor PC board - Small board with optical flag sensor (Flag not included) - For sensing leading edge of paper -
Mounts in the bottom right of the paper pick-up assembly
80
RM1-0574-000CN Paper sensor PC board - Small board with optical flag sensor (Flag not included) - For sensing 'out of paper' in the
paper tray - Mounts in the bottom left of the paper pick-up assembly
Shaft
81
RM1-0533-000CN Paper pick-up shaft assembly - Includes the shaft, the two cams, pick-up roller holder, and end cap - Mounts in the
paper pick-up assembly
Spring
82
RA0-1050-000CN Compression spring - Clutch spring - Engages the center gear in the paper feed roller gear/clutch assembly - Mounts on
the right side of the paper pick-up assembly
83
RA0-1060-000CN Compression spring - Provides upward pressure for the separation pad assembly - Mounts in the paper pick-up
assembly
84
RA0-1061-000CN Compression Spring - Provides upward pressure for the rear of the lift plate assembly (2 Used) - Mounts on top of the
paper pick-up assembly
© 2004 Hewlett-Packard 4