Filter
Top Products
For additional fax setup information, in specific countries/regions, see the Fax
Configuration website listed below.
Austria
www.hp.com/at/faxconfig
Germany www.hp.com/de/faxconfig
Switzerland (French) www.hp.com/ch/fr/faxconfig
Switzerland (German) www.hp.com/ch/de/faxconfig
United Kingdom www.hp.com/uk/faxconfig
Case A: Separate fax line (no voice calls received)
If you have a separate phone line on which you receive no voice calls, and you have
no other equipment connected on this phone line, set up the HP Fax as described in
this section.
Back view of the HP Fax
1 Telephone wall jack
2 Use the phone cord supplied in the box with the HP Fax to connect to the "1-LINE" port
To set up the HP Fax with a separate fax line
1. Using the phone cord supplied in the box with the HP Fax, connect one end to
your telephone wall jack, then connect the other end to the port labeled 1-LINE
on the back of the HP Fax.
Note If you do not use the supplied cord to connect from the telephone
wall jack to the HP Fax, you might not be able to fax successfully. This
special phone cord is different from the phone cords you might already
have in your home or office.
2. Set the Answer Mode to Fax.
3. (Optional) Change the Rings to Answer setting to the lowest setting (two rings).
4. Run a fax test.
User Guide
17
Finish setup