Filter
Top Products
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 35).
5. Remove the keyboard (see
Keyboard on page 39).
6. Remove the top cover (see
Top cover on page 43).
7. Remove the hard drive (see
Hard drive on page 47).
8. Remove the USB board (see
USB board/audio jack on page 50).
9. Remove the WLAN (see
WLAN module on page 51).
10. Remove the system board (see
System board on page 54).
Remove the RJ-45 cover:
1. Remove the Phillips M screw (1) for the RJ-45 cover.
2. Lift the RJ-45 cover (2) to remove it from the base enclosure.
Reverse these procedures to replace the RJ-45 cover.
Display assembly
Description Spare part number
Antenna Kit (includes left and right wireless antenna cables and transceivers) 697913-001
Display Panel Cable Kit (includes display panel cable and webcam/microphone module cable) 697911-001
Display enclosure:
●
Ruby red 697909-001
● Sparkling black 697910-001
Display Hinge Kit (includes left and right display hinges and brackets) 697908-001
Webcam/microphone module 697903-001
IMPORTANT: Make special note of each screw and screw lock size and location during removal
and replacement.
Component replacement procedures 71